Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1385001.png)
Trunk Lamp: Service and Repair
TRUNK LAMP ASSEMBLY
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Carefully release lamp tangs from trunk lid trim, position lamp for access, disconnect harness multiplug and remove lamp from trunk.
Installation
1. Position lamp at trunk lid and connect harness multiplug.
2. Ensuring that harness is routed correctly, finally position and fully seat lamp in trunk lid liner.
3. Connect ground cable to battery terminal and fit battery cover.
