jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Combination Switch|Description and Operation|Page 5964 > < Trunk Lamp|Service and Repair
Page 1
background image

Combination Switch: Description and Operation

The lighting switch is on the left-hand side of the steering column and controls the following functions.

Direction Indicators

The direction indicators:

Operate when the ignition switch is in position II.
Are operated by moving the switch stalk up or down until it latches in position, to indicate a right or left turn respectively.
Can be operated while the switch stalk is held against spring pressure before reaching the latch position.
Cancel automatically upon completion of a turn, the column switch returning to the center position.

An audible ticking and a flashing green warning lamp on the instrument cluster indicate that the direction indicators are operating. If an indicator bulb
fails, the warning lamp and ticking operate at twice the normal rate.

Sidelamps and Headlamps

These are controlled by rotating the end of the column switch as follows 

In the OFF position:

All exterior lamps are switched OFF. 

In the sidelamp position:

The front sidelamps, tail, license plate and any other lamps required by local legislation are switched ON.
The sidelamps tell-tale lamp illuminates.

In the headlamp position, with the ignition switch in position II:

The headlamps are switched ON in addition to the lamps switched on in the sidelamp position.

If the ignition is switched to the OFF position with the column switch in the headlamp position the sidelamps, tail and license plate lamps will stay ON,

Combination Switch|Description and Operation|Page 5964 > < Trunk Lamp|Service and Repair