Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-236010.png)
34. Remove outer bearing cup from hub carrier.
^
Position hub carrier on a block of wood.
^
Using a drift, remove and discard outer bearing cup.
35. Clean hub and hub carrier.
Installation
1. Place hub carrier on press bed and insert inner bearing cup.
2. Using a hydraulic press, install new inner bearing cup in hub carrier.
^
Install special handle 18G134 to tool 204-118/2.
^
Align special tool 204-118/2 to bearing cup.
^
Align assembly to ram, and operate press to fully seat bearing cup.
