Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-231017.png)
9. Position special tool (204-195) on hub studs and install securing nuts.
10. Slacken but do not remove hub to axle shaft securing nut.
11. Remove nuts and withdraw special tool (204-195) from hub.
12. Remove rear brake disc.
13. Remove parking brake shoes.
14. Remove wheel speed sensor.
Disconnect wheel speed sensor harness connector.
Remove sensor securing bolt and withdraw sensor from hub carrier.
