Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-231027.png)
13. Tighten pivot pin nut.
Align marker on pivot pin flange with mark made on wishbone.
Ensuring pin position is not disturbed, tighten nut to 88 - 118 Nm.
14. Install wheel speed sensor on hub carrier.
Position sensor on hub carrier and install and tighten bolt to 7 - 10 Nm.
Connect wheel speed sensor harness to sensor.
15. Using new tie strap, secure wheel speed sensor harness to hub carrier.
16. Install handbrake shoes.
17. Install brake disc.
