Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-232038.png)
28. Install locating collar and hub nut on axle shaft, but DO NOT tighten hub nut.
29. Tighten pivot pin nut.
Align marker on pivot pin flange with mark made on wishbone.
Ensuring pin position is not disturbed, tighten nut to 88 - 118 Nm.
30. Install wheel speed sensor on hub carrier.
Position sensor on hub carrier and install and tighten bolt to 7 - 10 Nm.
Connect wheel speed sensor harness to sensor.
