Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-232045.png)
19. Install a thread protector on axle shaft.
20. Release hub from axle shaft.
Position hub puller on hub studs. (204-011)
Install securing nuts.
Progressively tighten puller center bolt to release hub from axle shaft splines.
21. Remove nuts and release puller from hub.
22. Remove thread protector from axle shaft.
23. Release handbrake cable from suspension mounting bracket.
Remove cable retaining clip.
Draw cable through suspension mounting bracket aperture.
