Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-81003.png)
4. Position trim finisher/release button assembly on trunk lid and install securing nuts.
5. Connect release button harness connector and install on retaining clip.
6. Reposition rear of trunk lid liner and secure with new fasteners.
7. Position lock finisher and install securing bolts.
8. Install covers over finisher securing bolts.
9. Install trunk lights. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair
