Vanden Plas (X308) V8-4.0L (AJ27) (2000)
7. Remove the air intake ducting from the generator. The ducting comprises two sections; the upper section is retained by two screws to the sump
body assembly and the lower (horizontal) section is retained by one screw.
8. Disconnect the generator harness.
1. Disconnect the harness multi-plug.
2. Remove the protective boot from the positive terminal, remove the terminal nut and disconnect the cable from the terminal. Where fitted,
disconnect the suppression module positive cable from the positive terminal.
3. Where fitted, remove the nut which secures the suppression module negative cable and disconnect the cable from the generator. Reposition the
suppression module harness clear of the generator.