Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Starter Motor: Testing and Inspection
Starter Motor Internal Connections
The starter motor and solenoid in the previous figure are shown diagrammatically to indicate simply, the electrical circuit and various connections.
Basic Checks
Before changing any component, check the continuity of relevant harness circuits; in some instances, the PDU will not differentiate between a faulty
component and a damaged connection or wiring.
Check any relevant connections and relay bases to confirm that the connection is electrically sound and that a terminal pin has not been pushed back into
the connector shell, ie. not making a connection to its mating pin / socket.
Check the following fuses: