Vanden Plas (X308) V8-4.0L (AJ27) (2000)
6. Position and connect harness to steering transducer.
RHD vehicles.
Position steering harness behind return pipe.
Connect harness to transducer.
7. Secure return pipe on steering rack.
Position pipe rubber support on steering rack.
Position pipe on support.
RHD vehicles. Position harness on pipe support rubber.
Secure pipe and harness(RHD vehicles) to support with new tiestrap.
8. Position wishbone front arm on crossbeam and install but do not tighten eccentric bolt and nut.