Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-893014.png)
9. Install shock absorber mounting bracket.
Position shock absorber mounting bracket on wishbone rear arm.
Install wishbone front arm to rear arm securing bolt and tighten to 77 - 103 Nm.
10. Install stabilizer bar link to wishbone bracket nut and bolt and tighten to 41 - 54 Nm.
11. Tighten shock absorber lower bolt and nut to 43 - 57 Nm.
