Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-893016.png)
15. Position tie rod ball joint taper pin on steering arm and install and tighten nut to 71 - 85 Nm.
16. Install spring pan, rubber lower seat, spring and rubber upper seat on Special Tool 204-111.
17. Install spring pan/spring assembly and special tool 204-111 in suspension turret.
Ensuring upper seat is correctly positioned, install spring in suspension turret.
Engage tool dowel in turret slot.
