Vanden Plas (X308) V8-4.0L (AJ27) (2000)
18. Rotate tool adjuster to lightly tension spring.
19. Install suitable guide pins in spring pan/wishbone bolt locations.
20. WARNING: WHEN ROTATING TOOL ADJUSTER, ENSURE THAT TOOL STEM DOES NOT TURN AND DISTURB POSITION
OF DOWEL IN SUSPENSION TURRET.
Install spring pan to wishbone securing bolts.
Rotate tool adjuster to gradually increase spring tension.
Progressively substitute spring pan securing bolts for guide pins.
Tighten spring pan bolts to 70 - 90 Nm.