Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. Install half-bush/spacer tube assembly in wishbone.
Align half-bush/spacer tube assembly with wishbone bore.
Position wishbone and half bush/spacer tube assembly between vise jaws.
Close vise jaws until half-bush/tube assembly is fully seated in wishbone.
5. Remove wishbone from vise.
6. Install second half-bush in wishbone.
Align and engage second half-bush with installed spacer tube.
Position wishbone and half bush assembly between vise jaws.
Close vise jaws until second half-bush assembly is fully seated.
7. Remove wishbone from vise.
8. Following steps 1 to 7, install final bush assembly to wishbone.