Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897039.png)
Mark position of clips on harness.
Remove tape securing clips to harness and discard clips.
42. Disconnect and remove steering harness.
Disconnect harness connector from transducer.
Remove harness from suspension assembly.
43. Remove steering rack from crossbeam.
Remove steering rack securing bolts.
Remove steering rack and mounting brackets.
44. Release stabilizer bar from link arms.
Remove link arm to stabilizer bar securing nut.
Release link arm from stabilizer bar.
Repeat procedure to release opposite end of stabilizer bar from link arm.
