Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897040.png)
45. Remove stabilizer bar from crossbeam.
Remove stabilizer bar securing bolts.
Remove stabilizer bar mounting brackets and remove bar from crossbeam.
46. Remove wishbone securing nuts.
Remove lower wishbone front arm eccentric bolt securing nut.
Remove lower wishbone rear arm eccentric bolt securing nut.
Repeat procedure to remove wishbone securing nuts from opposite side.
47. Remove upper wishbone fulcrum shaft securing nut.
Repeat procedure to remove securing nut from opposite side fulcrum shaft.
48. Remove wire temporarily supporting hub assembly.
