Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-897041.png)
49. Remove wishbone/hub assembly from crossbeam.
Supporting hub assembly, withdraw lower wishbone eccentric bolts.
Supporting hub assembly, withdraw fulcrum shaft from upper wishbone.
Remove wishbone/hub assembly from crossbeam.
Repeat procedure to remove wishbone/hub assembly on opposite side.
50. Remove crossbeam front mountings.
Remove front mounting heatshield.
Remove four bolts securing mounting to crossbeam.
Repeat procedure to remove mounting on opposite side.
Installation
Installation
