Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Seals and Gaskets: Service and Repair
Extension Housing Seal, A/T
Rear Extension Housing O-Ring Seal
Rear Extension Housing O-Ring Seal
Removal
1. Select N position.
2. Raise the vehicle for access.
3. Remove the front muffler.
4. Locate a transmission jack, Epco V-100 or similar, under the transmission unit.
Adjust the angle of the jack to suit the transmission.
Secure the side clamps.
Pass the safety chain over the transmission unit and secure.
Take the weight of the transmission and engine.
5. Remove the engine rear mounting bracket.
Remove the engine rear mounting to bracket bolt.
Remove the mounting bracket to body bolts.
6. Gently lower the transmission jack.