Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-619006.png)
8. Remove the housing oil seal.
Use a suitable seal puller.
9. Clean the oil seal mating faces.
Installation
1. Install a new housing oil seal.
Lubricate the oil seal prior to fitting.
Using tool 307-358, fit the oil seal.
2. Fit the drive coupling to the housing.
Hold the housing assembly in a vice with soft jaws fitted and carefully insert the coupling.
Fit tool 205-053 to the coupling.
