Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-622002.png)
6. Remove harness multiplug retaining clip.
Push the multiplug into the transmission casing to release.
Discard the two 'O' rings.
Installation
1. Installation is the reverse of the removal procedure noting that:
2. Lubricate the new 'O' rings prior to fitting.
3. Tighten the securing bolts, selector cable bracket to transmission casing, to the specified torque figure.
4. Connect the battery and fit the battery cover.
Reset the radio and the clock.
