Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-692002.png)
Remove the fluid pan and all traces of gasket material.
4. Remove the input speed sensor.
NOTE: M5 fixing.
Release the screw which secures the input speed sensor bracket and pull the sensor clear.
5. Disconnect the multiplug from the speed sensor.
Installation
1. NOTE: M5 fixing.
Connect the multiplug, install the input speed sensor and securing bracket. Tighten the screw to the specified torque figure.
