Vanden Plas (X308) V8-4.0L (AJ27) (2000)
5. Remove bulb from switch pack base.
Installation
1. Fit illumination bulb in switch pack base and using a small flat bladed screwdriver rotate it 1/8 turn clockwise to fully seat.
2. Fit switch pack to armrest. See: Front Door/Front Door Glass Lift Switch pack
3. Fit casing/armrest assembly to door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
Rear Door Glass Lift Switch/Ashtray Assembly
REAR DOOR GLASS LIFT SWITCH/ASHTRAY ASSEMBLY
Removal
1. Remove casing/armrest assembly from door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
2. Remove armrest from casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
3. Position armrest for access, slacken and remove two switch pack securing screws and remove switch pack assembly from armrest.