Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. Slacken and remove screws securing veneer panels to switch and ashtray.
Installation
1. Position veneer panels on switch and ashtray, and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
4. Fit casing/armrest assembly to door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
Rear Door Glass Lift Switch/Ashtray Veneer Panels
Removal
1. Remove door casing veneer panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2. Remove door casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
3. Remove door armrest and remove switch/ashtray assembly from armrest. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and
Repair
4. Slacken and remove screws securing veneer panels to door glass switch/ashtray assembly.
5. Remove veneer panels from switch/ashtray assembly.
Installation
1. Position veneer panel over switch/ashtray assembly and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten the two securing screws.
3. Fit armrest to door casing. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and Repair
4. Fit casing to door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair