X-Type (X400) V6-3.0L (2002)
General Module: Service and Repair
Removal
CAUTION: Prior to removal of the module, it is necessary to upload module configuration information to the approved Jaguar diagnostic
system. This information needs to be downloaded into the new module once installed.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
1. Disconnect the battery ground cable. See: Starting and Charging/Battery/Service and Repair
2. Disconnect the generic electronic module (GEM) electrical connectors.
3. Remove the GEM.
1. Press the tang.
2. Remove the GEM
Installation
1. To install, reverse the removal procedure.