XJ-12 (X300) V12-6.0L (1995)
11.
Connect the PDU to the vehicle using the serial comm. cable and the VBA as instructed.
12.
Switch the ignition ON.
13.
The PDU will then establish communications with the instrument pack.
14.
The PDU displays the message "Please wait" while it reads the software version from the pack along with the calibration values.
15.
If the calibration is correct, no reprogramming is required. If incorrect, the PDU disables the gauges and writes new values, then reactivates the
gauges.
16.
The PDU will display a message to indicate if the reprogramming was successful. The PDU then returns to the VIN screen.
PARTS INFORMATION:
DESCRIPTION
PART NUMBER
Oil pressure switch
LNA 5642CA
NOTE:
This switch is installed in production from the following engine serial numbers onward:
6 cyl. Serial Number 9J134020
V12 Serial Number 8E11876
WARRANTY INFORMATION:
Labor time includes the time to reprogram the instrument pack.
PARTS INFORMATION:
DESCRIPTION
PART NUMBER
Dimmer Module
LXF 6940AA
WARRANTY INFORMATION: