XJ-6L (X300) L6-4.0L (AJ16) (1997)
Arm Rest: Service and Repair
Armset Renew
Fig. 1
Front door:
-
Remove front door lower trim pad.
-
Undo and remove door pocket to trim pad fixings.
-
Displace and remove door pocket l armrest assembly.
-
Displace and remove pocket insulating foam pad.
-
Undo and remove armrest to pocket securing nuts.
-
Remove trim pad mounting clip and arm rest.
Reardoor:
-
Displace and remove the armrest securing screw hole plastic finisher covers.
-
Undo and remove the armrest securing screws and remove the armrest assembly.
-
Remove the armrest screw hole plastic finishers.
-
Undo and remove the chrome finisher securing screws.
-
Undo and remove the armrest inner black finisher securing screws.
-
Displace and remove the finisher.
-
Place the armrest (Fig.1) aside.
Refit in the reverse order of the removal procedure.