XJ-6L (X300) L6-4.0L (AJ16) (1997)
Console: Service and Repair
Center Console
Removal and Installation
Fig. 1
-
Remove the battery cover. Disconnect the battery.
-
Remove the console rear extension finisher (Daimler/VDP).
-
Remove the console rear extension veneer panel (Daimler/VDP).
-
Remove the console rear extension (Daimler/VDP).
-
Remove the drivers side underscuttle pad.
-
Remove the passenger side underscuttle pad.
-
Remove the console ashtray.
-
Remove the console finisher veneer panel.
-
Remove the radio console.
-
Remove the fascia center veneer panel.
-
Undo and remove the console upper securing screws.
-
Displace and reposition the rear air distribution outlet hex.
-
Disconnect the cigar lighter multi-plug (where fitted).
-
Undo and remove the center console rear mounting securing screw.
-
Displace and remove the console assembly and place on the bench.
-
Displace and remove spire clips from console assembly.
-
Open the glove box lid.
-
Remove the glove box lid latch.
-
Undo and remove glove box lid rear securing screws.
-
Displace and remove glove box lid/glove box assembly.
-
Place the console (Fig.1) aside.
Refit in the reverse order of the removal procedure.
Center Console Ashtray