XJ-6L (X300) L6-4.0L (AJ16) (1997)
/l6-4.0l_(aj16)/Page-250001.png)
Drive Belt: Adjustments
Generator/Water Pump Drive Belt
Burroughs method: new belt 556 to 578 N. Run for one minute, allow belt to cool and reset to the in-service setting. If in-service tension falls below
356 N, reset at 511 N to 534 N.
Clavis method: new belt 174 to 180 Hz. Run for one minute, allow belt to cool and reset to the in-service setting. If the in-service tension falls below
140 Hz, reset at 167 to 173 Hz. (Measuring point: mid-way between crankshaft and generator pulleys).