XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
26. Support weight of crossbeam.
-
Position a jack under crossbeam.
-
Place a piece of wood between jack and crossbeam.
-
Raise jack to just support crossbeam.
27. From engine compartment, remove crossbeam front RH bolts.
28. Remove power steering fluid reservoir for access.
-
Remove reservoir securing nuts and bolts.
-
Position reservoir for access.
29. From engine compartment, remove crossbeam front LH bolts.
30. CAUTION: Slowly lower the crossbeam just sufficient to provide the required clearance. Lowering the crossbeam excessively can
damage the suspension and steering pipes.
Carefully lower crossbeam to provide sufficient clearance between front mounting and body.