XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
![background image](/jaguar/xj-8l_sedan_(x308)/v8-4.0l_(aj27)/Page-1265006.png)
31. Remove crossbeam front mounting.
-
Remove front mounting heatshield.
-
Remove four bolts securing mounting to crossbeam.
Installation
1. Install crossbeam front mounting.
-
Position new mounting on crossbeam.
-
Install four bolts securing mounting to crossbeam and tighten to 22-28 Nm.
-
Install front mounting heatshield.
2. NOTE: It may be necessary to use a hammer and drift to finally align new mounting with body location.
Carefully raise crossbeam assembly into position.
-
Ensure that dowels of both crossbeam mountings are correctly seated in body locations.
3. Ensure that both engine hydramounts are correctly seated in crossbeam locations.