XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
40.
Inspect A/C compressor dowel location hole to ensure it is not worn out-of-round (Illustration 6).
Note:
If the A/C compressor dowel hole is out of round, install a new A/C compressor.
41.
Install A/C compressor (see Workshop Manual, JTIS CD ROM, section: 412-03, SRO 82.10.20).
42.
Install new FEAD belt and tensioner (see Workshop Manual, JTIS CD ROM, section: 303-05, SRO 12.10.41).
43.
If fitted, install supercharger drive belt (see Workshop Manual, JTIS CD ROM, ,section: 303-12, SRO 18.50.08 except 2001 MY XKR vehicles
see Workshop Manual, JTIS CD ROM, section: 303-05).
44.
If required, recharge A/C system (see Workshop Manual, JTIS CD ROM, section: 412-00).
45.
Reconnect battery.
46.
Install battery cover and close luggage compartment lid.
47.
Remove fender protectors and close hood.