XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1647004.png)
To install, reverse the removal procedure.
-
Tighten to 5 Nm.
2. Tighten to 2 Nm.
3. Tighten to 2 Nm.
4. Tighten to 1 Nm.
Front Seat Backrest - VIN Range: G00442->H18679
Front Seat Backrest - VIN Range: G00442->H18679
Removal
1. WARNING:
-
A restraints control module (RCM) only requires replacement if the system has incurred five separate deployments. At no time
change the RCM for less than five separate deployments.
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module. Failure to follow this instruction may result in personal injury.
-
Carry a live air bag module with the air bag and trim cover pointed away from your body. This will reduce the risk of injury in the
event of an accidental deployment. Failure to follow this instruction may result in personal injury.
-
Do not set a live air bag module down with the trim cover face down. Failure to follow this instruction may result in personal injury.
-
After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterwards. Failure to follow this instruction may result in personal
