XJ (X350) V8-4.2L (2005)
Vehicles with standard seats
1. Connect the rear passenger footwell courtesy lamp electrical connector.
Vehicles with sports seats
NOTE: Make sure the fir tree clips are located fully into the carrier.
1. Install the new fir tree clips to the front seat backrest trim panel.
All vehicles
CAUTION: Do not strike the backrest trim panel to engage the fir tree clips. Failure to follow this instruction may result in damage to the front seat
backrest rear cover.
NOTE: Vehicles with sports seats shown, vehicles with standard seats similar.
1. Install the front seat backrest rear cover.
-
Gently push on the backrest trim panel until the first barbs on the new fir tree clips are engaged into the frame.
-
Place one hand on the squab bolster.
-
Using even pressure firmly push the front seat backrest trim panel directly over the fir tree clips until fully seated.