XJ (X350) V8-4.2L (2005)
7. CAUTION: Do not allow the brake caliper to hang on the hydraulic hose, as this will damage the hose. Failure to follow this instruction
will result in damage to the hose.
NOTE: Left-hand shown, right-hand similar.
Remove the brake pad from the caliper piston
8. NOTE: Left-hand shown, right-hand similar.
Remove the brake pad.
Installation
1. WARNING: Do not use compressed air to disperse brake dust into the atmosphere.
CAUTION: Brake pads must always be replaced in axle sets.
CAUTION: Make sure the brake disc faces are clean before installation.
NOTE: Left-hand shown, right-hand similar.
Install the brake pad.
^
Using a suitable tool, fully retract the brake caliper piston.
2. NOTE: Make sure the brake pad is correctly installed to the caliper piston.