jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

VIN Range: G00442->G45703 (17.15.13)|Page 3416 > < VIN Range: G00442->G45703 (17.15.13)|Page 3414
Page 4
background image

WARNING:  Rotate the special tool height adjustment valve slowly. Failure to follow this instruction may result in personal injury.

CAUTION:

-

Make sure the rear subframe weight is evenly supported on the special tool. Failure to follow this instruction may result in damage to the vehicle.

-

Make sure when lowering the rear subframe damage does not occur to the surrounding components.

15. Using the special tool, lower the rear subframe to a maximum of 152 mm (6 inch)

Vehicles with supercharger

NOTE:  Rear subframe shown removed for clarity.

1. Disconnect the fuel pump driver module electrical connector.

NOTE:  Rear subframe shown removed for clarity.

2. Remove the fuel pump driver module.

-

Remove the retaining clip.

All vehicles

NOTE:  Rear subframe shown removed for clarity.

1. Disconnect the evaporative emission canister vent solenoid vent hose.

VIN Range: G00442->G45703 (17.15.13)|Page 3416 > < VIN Range: G00442->G45703 (17.15.13)|Page 3414