XJ (X350) V8-4.2L (2005)
NOTE:
-
Left-hand shown, right-hand similar.
-
Using a suitable tool, mark the position of the rear subframe to the vehicle body.
11. Remove the noise, vibration and harshness (NVH) brace retaining bolts.
WARNING: Rotate the special tool height adjustment valve slowly. Failure to follow this instruction may result in personal injury.
12
Install the special tool to support the rear subframe.
NOTE: Left-hand shown, right-hand similar.
13. Remove the NVH brace.
-
Remove and discard the rear subframe front retaining bolts.
NOTE: Left-hand shown, right-hand similar.
14. Remove and discard the rear subframe rear retaining bolts.