XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-747002.png)
NOTE: Left-hand shown, right-hand similar.
6. Detach the air springs.
7. Remove both rear exhaust mufflers and tail pipes.
CAUTION: Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft.
8. Detach the driveshaft from the rear drive axle flange.
-
Mark the position of the driveshaft in relation to the rear drive axle flange.
-
Mark the position of the balance nut in relation to the rear drive axle flange (if fitted).
-
Mark the position of each nut and bolt in relation to the rear drive axle flexible joint.
9. Remove the fuel tank filler pipe to fuel tank hose.
10. Detach the rear axle electrical connectors.