XJR (X300) L6-4.0L SC (AJ16) (1995)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Pick Up
Oil Pump Pipe `O' rings, Renew
-
Remove the oil pan.
-
Place a suitable drain tray under the oil transfer housing area and remove the transfer housing/pick-up pipe (1, 2, 4, 5 Fig. 1).
-
Remove the oil pump pick-up pipes (3 Fig. 1).
-
Remove and discard the `O' rings. Clean the transfer housing and oil pipes.
-
Carefully fit new `O' rings (lubricated with petroleum jelly) to the oil pipes (1 Fig. 2) and refit the pipes to the oil pump.
-
Fit the transfer housing to the engine. Fit and tighten the securing bolts.
-
Refit the oil pan.