XJR (X300) L6-4.0L SC (AJ16) (1995)
Oil Pick Up/Strainer: Service and Repair
Oil Strainer, Engine
-
Remove the oil pan.
-
Remove the bolts securing the rear windage tray (1 Fig. 1) to the cylinder block and remove the tray.
-
Remove the three bolts (2 Fig. 1) securing the strainer and remove the strainer (3 Fig. 1).
-
Clean all components and examine for damage and wear.
-
Apply sealant to the replacement strainer, and fit and secure to the housing with the bolts. See Service Materials under Engine Specifications,
Fluid Types.
-
Refit the rear windage tray to the cylinder block and secure with the bolts.
-
Refit the oil pan.