XJR (X300) L6-4.0L SC (AJ16) (1995)
Drive Belt: Service and Repair
Supercharger Belt, Tensioner Pulley
SUPERCHARGER DRIVE BELT TENSIONER PULLEY, RENEW
-
Raise the vehicle on a ramp.
-
Remove the supercharger drive belt.
-
Remove the tensioner pulley securing bolt (4 Fig. 1).
-
Remove the tensioner pulley from the carrier and discard it.
Refit in the reverse order of the removal procedure but do not tighten, the tensioner pulley securing bolt.
Note: When fitting a new tensioner pulley to the carrier, ensure that the carrier is correctly engaged in the tensioner bracket adjustment slot.