XJR (X300) L6-4.0L SC (AJ16) (1995)
^
Fit two bolts to sandwich plate / valve body for alignment purposes, see Fig. 1.
Note: Select the close fitting bolt hole of the valve body and the elongated hole of the sandwich plate.
^
Fit new accumulator block to sandwich plate gasket.
^
Fit springs to accumulator block pistons.
^
Fit and align accumulator block, pistons and springs assembly to valve body sandwich plate.
^
Depress accumulator assembly against spring pressure.
^
Fit and tighten accumulator block to valve body securing bolts.
^
Remove the two bolts from sandwich plate / valve body (used for alignment purposes).
^
Invert valve body assembly.
^
Connect internal harness plug to variable force motor.
^
Connect internal harness plug to pulse width modulator.
^
Connect internal harness plug to temperature sensor.
^
Connect internal harness plug to 'B' shift solenoid.
^
Connect internal harness plug to 'A' shift solenoid.