XJR (X308) V8-4.0L SC (AJ26) (1998)
![background image](/jaguar/xjr_(x308)/v8-4.0l_sc_(aj26)/Page-1063023.png)
12. Reconnect the air cleaner cover.
Install the five clips, which secure the air cleaner cover.
13. Connect the intake tube to the throttle body.
Connect the intake tube to the throttle body.
Install the two bolts, which secure the intake tube to the throttle body. Tighten to 4-5 Nm.
14. Reconnect the air flow meter multi-plug.
15. Install a new strap to secure the vacuum pipe to the induction elbow.
16. Connect the breather pipe to Bank 1 camshaft cover. Install a new O-ring seal to the breather pipe.
Reconnect the breather pipe to the stub pipe.
17. Refill the cooling system.
18. Connect the battery and install the battery cover.
Refer to the Battery Reconnection Procedure.
19. Remove the paint work protection sheets and close the engine cover.
Bank 1
Removal
1. Disconnect battery ground cable (IMPORTANT, see Starting and Charging for further information).
2. Drain radiator coolant.