XJR (X308) V8-4.0L SC (AJ26) (1998)
![background image](/jaguar/xjr_(x308)/v8-4.0l_sc_(aj26)/Page-1063024.png)
3. Remove air cleaner cover 1 intake assembly.
4. Remove throttle body.
5. Remove exhaust gas re-circulation valve (EGR) if installed.
6. Remove throttle intake elbow.
7. Remove supercharger outlet duct.
8. Remove coolant outlet pipe.
9. Remove supercharger drive belt.
10. Remove supercharger.
11. Remove intake air temperature sensor 2 from charge air cooler.
12. Detach engine harness retaining clip from rear of charge air cooler.
13. Disconnect hoses from charge air cooler.
Place absorbent cloth in appropriate position.
Disconnect hoses.
14. CAUTION: Take care to avoid dropping any objects or foreign matter into engine inlet duct with charge air cooler removed.
Remove charge air cooler from the engine.
Remove eight bolts.
Remove charge air cooler.
Discard gasket.
Clean all mating faces.
Installation