XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1532005.png)
4. Install caliper carrier to hub carrier.
-
Position carrier.
-
Install and tighten bolts to 54 - 66 Nm.
CAUTION: Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work, with
clean water.
5. Slowly retract piston into caliper housing.
CAUTION: Always install new brake pads, irrespective of the condition of the original pads, when renewing a brake disc.
NOTE: Clean caliper piston to pad mating surface.
6. Install brake pads to caliper housing.