XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Power Steering Line/Hose: Service and Repair
Hose - Pump to Steering Rack
Hose-Pump to Steering Rack
Removal
1. Open engine compartment and fit paintwork protection covers.
2. Raise vehicle on a four-post ramp.
3. Place a drain pan under steering rack.
4. Remove retaining straps which secure hose to steering rack.
5. Disconnect hose from steering rack.
Remove bolt from retaining plate.
Release hose, hold it clear of steering rack and allow fluid to drain.
Fit blanking plugs to hose and steering rack port.
Remove drain pan and discard fluid.