XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. From above the vehicle, disconnect hose from pump.
Release union nut.
Disconnect hose.
Fit blanking plugs to hose and pump port.
7. From below the vehicle remove hose.
Remove hose.
Remove mounting rubbers from hose.
Installation
1. Installation is reverse of removal procedure.
2. Secure hose to track.
Locate hose and retaining plate.
Fit and tighten bolt.
3. Fit hose to pump.
Remove blanking plug from hose.
Fit a new O-ring seal to hose.