XK (X150) V8-4.2L (2008)
/v8-4.2l/Page-747002.png)
7. NOTE: Note the fitted position of the locating pegs.
Remove the HCU and pipe assembly.
> Remove the 3 Torx bolts.
8. CAUTION: Always plug any open connections to prevent contamination.
Remove the HCU.
> Disconnect the 6 brake pipe unions.
9. NOTE: Do not disassemble further if the component is removed for access only.
Remove the HCU bracket.
> Remove the 3 Torx bolts.
Installation
