XK (X150) V8-4.2L (2008)
Vacuum Brake Booster: Service and Repair
Brake Booster - LHD
Removal
1. Remove the brake master cylinder.
2. CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
Remove the driver's side footwell trim panel.
> Carefully release the 3 clips.
3. Release the brake switch.
> Rotate clockwise approximately 30 degrees.
4. Release the vacuum pipe.
5. Remove the brake booster.
> Remove the brake pedal clevis pin.
> Remove the 4 nuts.
6. Remove and discard the gasket.