XK (X150) V8-4.2L (2008)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Make the SRS system safe.
3. Remove the steering wheel.
4. Remove the instrument panel, lower trim panel.
5. Remove the steering column lower cowl.
^
Remove the 2 screws.
^
If installed, disconnect the steering column and foot pedal control switch electrical connector.
6. Remove the steering column upper cowl.
^
Remove the 3 screws.
7. Release the multifunction switch.
^
Depress the 2 clips.
^
Repeat the above procedure on the opposite hand.